Florida Custom Motorcycle Title Process

Bare bones Bobber Kit

Art In Motion LLC – 1503 Ross Ave, Kissimmee, FL 34744
(407) 847-0119
 

Art In Motion LLC Custom Motorcycle Kits can be titled one of two ways.   If the motorcycle you design is built in our shop under the “Build Your Own Bike” program where you work with our mechanics on the build itself, then we will affix a 17-Digit Federal Art In Motion, LLC VIN from our Kissimmee factory to the motorcycle.    A Federal VIN makes it easier, in general to get insurance from companies like Geico or Progressive Insurance, easier to get financing (well that still isn’t THAT easy in this economy), and easier to title and register. Call us at (407) 847-0119 to start this process.

BUT, not everyone wants to build their motorcycle in our shop, so below is what we know about the Florida State Special Construction Title process.  An ASPT motorcycle is harder to insure, needs to be financed with a personal loan (generally) and is much harder to title.  Not impossible, but it can be frustrating and lengthy.

The Steps to Apply for ASPT Title

ASPT Chopper Motorcycle Title in Florida

Custom Chopper Motorcycle Kit

If you want to purchase a custom motorcycle kit and assemble it entirely on your own, it will be considered an “assembled from parts” or “Special construction”  motorcycle.  You will need to keep good records of all purchases in order for the vehicle to be titled.

  • You will fill out the application for certificate of title form and take it to your local tax collector’s office.
  • You need to fill out a builder’s affidavit and maybe an additional sheet .  This sheet requires that you sign an affidavit that the vehicle will not be used for general daily transportation but will be maintained for occasional transportation, club activities, parades, tours or other functions of public interest and similar uses.   You will also need to state that the vehicle meets state equipment and safety requirements.  Refer to 320.0863, Florida Statutes for additional details.   Notice that the builders’s affidavit requires that you attach the original MSO, bill of sales(s) or receipts for all major component parts and this must include the name, address and telephone number and signature of the seller of the parts.
  • You need to get the bike inspected also at the regional DHSMV office

Custom Kit Motorcycle Title Process Question Form

Bobber In a Box Kit – Stripped

Bare bones Bobber KitThis is a bobber in a box kit called Stripped.  Normally, a bobber would be build or chopped out of some cheap old bike you have sitting around, but if you are looking for a bare-bones kit motorcycle then this is what we can do for you with 100% new parts.  When you build the bike at Art In Motion, then your own motorcycle  will also be assigned a 17-digit Art In Motion LLC VIN.   The kit pricing shipped to your location includes all part MCO’s required to register the bike properly. Call (407) 847-0119 or use the contact form at the bottom of the page.

Bobber In A Box Kit Parts List

The parts shown in the parts list below have a retail price of over $14,000.  When you buy this as a kit, the price drops to $12738.  As with all our kits, substitution is expected and price will vary accordingly.  There are many other options on frame styles that can be put together in a similar price range.

TR496495 Softail style Frame
ST swingarm
Swing arm mounting parts
Transmission plate
Kickstand
Oil tank
Oil tank mounting
Gas tank
Gas cap
Rear fender
Splash guard
Triple tree bearing
Dust shields
Front end Springer
Shocks
Seat allowance
WheelsTires and Brakes
40 spoke Wheels, pulley and brake   rotors
Rear wheel 16×3.5
Front wheel 16×3.5
Rotors matching wheels
Rear pulley matching wheels
Tubes
Rear Tire D404 130/90-16
Mount and Balance Rear tire
Front Tire D404 130/90-16
Mount and Balance front tire
Engines
Ultima black or natural engine
Driveline
Ultima
Ultima 6 speed black or polished transmission
Ultima 2″ open primary system
Belt
Fuel air and oil
Petcock
Fuel lines, filter and fittings
Oil filter
Oil lines
Oil filter mount
Exhaust
Pipes chrome
Gaskets, flanges and hardware chrome
Brakes
Front 4 piston brake caliper
Rear 4 piston brake caliper
Brake lines and fittings
Stop light switch
Controls
Forward Controls
Handle bars allowance
Handle bar rubber mounts
Handle Bar bolts
Handlebar Controls
Vinyl cables
Grips
Shifter rod including hemi joint   ends
Mirrors
Electrical
Electronic speedometer allowance
Coil single fire
Coil,motor  mount
Coil cover
Ignition switch
Spark plug wires
Charging system 32 amp chrome
Control and lighting module
Starter
Speed sensor
Headlight
Directional lights (4)
License plate bracket
Plate light
Battery strap 10″
Horn allowance

Bobber In a Box Kit Options

Here are some of the options for finishing – when we quote these two you it is as an “allowance” because there is a wide variety in pricing with finishes and labor depending on all the other options that you have selected.  Call (407) 847-0119 for information.

Finishes
Paint allowance
Powder coating allowance
Miscellaneous
Hardware
Shop Fee
Labor
Mock up and disassemble
Final assembly
Wiring Labor

The Ultimate ProStreet Chopper Kit

The Ultimate ProStreet Chopper KitThe Ultimate ProStreet Chopper Kit has high-end everything. Starting with the SLX frame that has a single sided swingarm, custom fit & fabrication, and many other options that take it over the top. All of the motorcycles built in our shop with the build your own motorcycle program will also be assigned a 17-digit Art In Motion LLC VIN. The kit pricing shipped to your location includes all part MCO’s required to register the bike properly. Call (407) 847-0119 or use the contact form at the bottom of the page. The motorcycle shown in the photos is a custom motorcycle that we built for a customer in England. It has additional options and assembly costs not listed in the kit price below.

 

 

The Ultimate ProStreet Chopper Kit Parts list

ProStreet Custom ChopperThe price for the options detailed below adds up to $ 63,955.   This motorcycle may require some amount of design time depending on how you want it modified.  There are many options on this list, so you can reduce or increase the price depending on your selections.

Frame
Rolling thunder SLX Regular frame   with single sided swing arm and radius down tube
Rolling thunder oil tank
Gas tank
Rear fender 13″ wide
Rear fender bracket
Triple tree bearing
Dust shields
Front fender allowance
Springer front end
Springer chrome
Springer chrome fender brackets
shark tooth accents chrome
hidden stops
Turn signal brackets
Internal brake line
Custom Controls with switches   and gauge
Custom leather tooled seat
Tires and wheels
Rear wheel 18×10.5 Eddie Trotta   Cyher chrome
Rear Tire Avon 300/35-18 with E   designation
Mount and Balance Rear tire
Front wheel 23×3.5 Eddie Trotta   Cyher chrome
Front Tire Avon 120/70-21 with E   designation
Change Front Tire Avon 130/60VR21   with E designation
Add for caps on rear axle
Driveline
TP 124 Engine show polished,   powder coated above 1st fin from bottom of cylinder and show diamond cut   heads and jugs.
Add for polished 45MM mikuni   carburetor and manifold
Oil filter mount
Baker RSD 6 speed chrome transmission
Add for billet chrome
Baker clutch release assembly   hydraulic chrome
Baker drive offset sprocket
Rivera Primo 3″ Belt drive   polished
EK Chain ZVX series X-ring chain   10,560# TS Chrome
Chain tensioner
Fuel air and oil
DM-425 Air filter
DM-54 Air filter mounting kit 45mm   Mikuni
Petcock Pingle vacuum operated
SS Braided fuel lines, filter and   fittings
Reusable billet oil filter show   polished Chrome filter in chrome allowance below
SS Braided Oil lines
Lucas 20w-50 oil
Exhaust
Pipes chrome
Add turn out claw
Add Quiet baffle
Add Chrome primary tube heat   shields
Add Chrome collector heat shield
Gaskets, flanges and hardware   chrome
Brakes
360 Brake including all mounting parts and hardware front
4 piston brake caliper rear allowance Using HHI Sproter modified
Machine work, welding and fitment   of custom designed caliper
Brake lines and fittings
Brake line tee
Stop light switch
Controls
HHI Forward Controls
Custom cycle controls handle bars   without gauges Stealth or phantom
Add Grips other than the ones CCC   has available
Shifter rod including hemi joint ends
Electrical
Coil Daytona twin tech single fire
Coil mount
Coil cover w/mount
Ignition switch
Accel thundersport wire
Charging system Spyke 32 amp chrome
Control and lighting module
ARSE keyless system
Compufire 2.0 starter
Saber mirror w/ gauges and lights
Speed sensor
Headlight
Directional lights
License plate bracket and light allowance total price to be determined when design is complete
Fuse holder w/ fuse
1/4″ wire harness cover   chrome
3/8″ wire harness cover   chrome
Chrome tywraps
Battery strap 10″
Tail Light allowance
deluxe kit LED set white
Horn allowance
Battery AGM
Wire and connectors
Limit switch for bike to height   before starting
Wiring Labor
Miscellaneous
Alarm system allowance Scorpio   alarm
Hardware chrome
Shop Fee
Design time
Consumables
Custom fab.
Spacers
Misc.

 

Nostalgic Custom Motorcycle Kit – The Doublewide

nostalgic style motorcycle kit This nostalgic custom motorcycle kit features an FLS frame.  A wrap-around oil tank brings you back a few years.  Its fat bob style fuel tank, wide fork style front end and a standard 250 tire kit finish off the look.   We call this custom motorcycle kit The Doublewide because of its hefty appearance and wide tire kit in the rear.   Photos currently shown for this bike in a box kit include photos of a Customized Harley Night Train that we modified for our customer in Norway.  After you assemble this kit, it will have a similar style to that motorcycle.   All of the motorcycles built in our shop with the build your own motorcycle program will also be a 17-digit Art In Motion LLC VIN.  The kit pricing shipped to your location includes all part MCO’s required to register the bike properly.  Call (407) 847-0119 or use the contact form at the bottom of the page.

Nostalgic Custom Motorcycle Kit Parts List

nostalgic cruiser motorcycleThe price for the options below adds up to $ 14,549.78.   You can change wheels, engine, add airbrush, and get the price up all the way to about $45,000 with some 3D wheels, high end airbrush,  performance engine and driveline.

TR496495 Frame
250 conversion kit
Swing arm mounting parts
Transmission plate
Kickstand
Oil tank
Oil tank mounting
Gas tank
Gas cap
Triple tree bearing
Dust shields
Front wide glide
Shocks
Seat Not included, requires custom   seat base
WheelsTires and Brakes
40 spoke Wheels, pulley and brake   rotors
Rear wheel 18×8.5
Front wheel 21×2.15
Rotors matching wheels
Rear pulley matching wheels
Tubes
Rear Tire Avon 250/40VR18
Mount and Balance Rear tire
Front Tire Avon 80/90-21
Mount and Balance front tire
Engines
Ultima natural engine 113-127 ci
Driveline
Ultima
Ultima 6 speed natural   transmission
Ultima 2″ open primary system
Belt
Fuel air and oil
Petcock
Fuel lines, filter and fittings
Oil filter
Oil lines
Oil filter mount
Exhaust
Pipes chrome
Gaskets, flanges and hardware   chrome
Brakes
Front 4 piston brake caliper
Rear 4 piston brake caliper
Brake lines and fittings
Stop light switch
Controls
Forward Controls
Handle bars allowance
Handle bar rubber mounts
Handle Bar bolts
Handlebar Controls
Vinyl cables
Grips
Shifter rod including hemi joint   ends
Mirrors
Electrical
Electronic speedometer allowance
Coil single fire
Coil,motor  mount
Coil cover
Ignition switch
Spark plug wires
Charging system 32 amp chrome
Control and lighting module
Starter
Speed sensor
Headlight
Directional lights (4)
License plate bracket
Plate light
Battery strap 10″
Horn allowance

Calendar Photo Shoots

Calendar photo shoots can be fun.   Sometimes guest photographers ask if they can come by to take photos of our motorcycles with their models.  One of their favorite subjects at our shop is Flyin’ Trike.   This trike will not be here much longer since it is sold and  is heading to New York State to ride around and be enjoyed.  The leather for its new seat is on the way and last bit of chrome being done.

Here are a couple of the snapshots from previous photo shoots – you’ll have to find the upcoming 2014 calendar yourself though – I didn’t get the contact information on it .